Archive for the ‘ book collection ’ Category

Book collection (updated)

Here is a updated list of some of the books I have:
Rating, Book


***** Aircraft Design: A Conceptual Approach. Fourth Edition. Daniel P. Raymer
Great standard book for everyone. A bit different equations than the Anderson’s book. This + Anderson’s book is a great combination.


*** Simplified Aircraft Design for Homebuilders. Daniel P. Raymer
This covers only basics. Does not take very long before the Aircraft Design: A Conceptual Approach is very much required. Not bad, but is not enough information for getting started with aircraft design alone. Can be a good introductory book if someone starts from scratch, sort of “soft landing” to the world of aerodynamics.


***** Aircraft Performance and Design. John D. Anderson, Jr.
Great overall book, similar to Raymer’s book. I use this book very often.


* Aerodynamics for Engineers
Concentrates too much on transsonic and hypersonic and jets rather than subsonic design. I rarely open this book, I am not designing a Space Shuttle and even if I would, this is like phone book in the depth, depth of the book is rather small. Everything covered, but just very little.



** Aerodynamics for Engineering Students
Quite similar than the Aerodynamics for Engineers. But more basic. And nothing special here.


***** Fundamentals of Aerodynamics, by John Anderson
John D. Anderson’s books are great. This one is no exception. Highly recommended.



** MODERN AIRCRAFT DESIGN, Volume 1 5th Edition, by Martin Hollmann.
You have to look at the source code of the basic programs to get something valuable of this book. Otherwise you will not be so much enlightened. I have been converting the programs to C++. It also has the Oshkosh airfoil program source code. Real vintage.


** MODERN AIRCRAFT DESIGN, Volume 2 4th Edition, by Martin Hollmann.You have to look at the source code of the basic programs to get something valuable of this book. Otherwise you will not be so much enlightened. I have been converting the programs to C++.


** COMPOSITE AIRCRAFT DESIGN. REVISED 2003. By Dr. Hal Loken and Martin Hollmann.You have to look at the source code of the basic programs to get something valuable of this book. Otherwise you will not be so much enlightened. I have been converting the programs to C++. There is some information on creating pressurized fuselage for Lancair IV if I remember the book right and also about lightning protection on composite aircraft (not sure, could be also in Advanced Aircraft Design, I do not have the book at hand when typing this). The information in general is not very deep, just listed how it can be done and that’s it.


** MODERN AIRCRAFT DRAFTING by Eric and Martin Hollmann.You have to look at the source code of the basic programs to get something valuable of this book. Otherwise you will not be so much enlightened. I have been converting the programs to C++. And also if you use Rhino, the lofting programs presented on this book do not have so much importance. You can do the same more conveniently with 3D CAD.  The information in general is not very deep, just listed how it can be done and that’s it.


** ADVANCED AIRCRAFT DESIGN by Martin Hollmann.
You have to look at the source code of the basic programs to get something valuable of this book. Otherwise you will not be so much enlightened. I have been converting the programs to C++.  The information in general is not very deep, just listed how it can be done and that’s it.


***** BRUCE CARMICHAEL’S PERSONAL AIRCRAFT DRAG REDUCTION
Excellent book on drag, laminar flow and laminar bodies. No other book covers these. Old one, availability nowadays poor, but I have it. I am feeling lucky. 


*** Model Aircraft Design
This covers basics from different perspective.


Jan Roskam: Aircraft Design parts 1-7
Jan Roskam: Airplane Flight Dynamics and Automated Flight Controls
Jan Roskam: Airplane Aerodynamics and Performance
Theory of Flight
Smith: Illustrated guide to aerodynamics
Ron Wanttaja: Kit airplane construction
Bingelis: Sportplane construction techniques
Synthesis of Subsonic Aircraft Design
Theoretical Aerodynamics
Hoerner: Fluid Dynamic Drag
Flight Performance of Aircraft
Design of the Airplane
Burt Rutan: Moldless composite sandwitch aircraft consrtuction





I am considering getting Theory of Wing sections. I heard in Oshkosh that actually the first part of it has interesting equations before the airfoil data, and that’s where John Roncz program codes are largely based on. I did not buy it before because I thought that I do not need the NACA foil data. Now I have incentive to get that too.