High altitude flight Re, new airfoil KS415/14.3

The Reynolds number at very high altitude is very low. Here is an article about airfoil study for 60000 ft altitude flight. My previous airfoils are not very suitable in a small aircraft at 60000 ft, they require longer chord to be efficient. I made series of new airfoils for short chord and high altitude and ended up with the KS415/14.3.

altitude = 20000 m
velocity = 80 m/s
wing chord = 0.8 m (80 cm)
Re = 396331.94
M = 0.2711

Therefore it is beneficial that the airfoil used in this kind of aircraft is such that provides maximum L/D at low Re, here around 400000.

Here are some simulations:

Then some airfoils that I created:


More simulation at low Re, two conditions: 80 m/s at 600000 ft and 111 m/s (400 km/h) at 60000 ft:

Added case 154 m/2 (300 kts) at 60000 ft:

Of these, the KS415 exhibits the lowest drag. Here is the geometry of the KS415:

Here is a smoothed version of KS415/14.3:

And simulation for a Reynolds number range:

  1. No trackbacks yet.

You must be logged in to post a comment.
%d bloggers like this: