>Wing droops on laminar flow section

>If you have wondered why Cirrus has the discontinuity on the wings. This may answer to that to some extent. I have not found any factual information about the airfoil section used on the Cirrus other than that it is a natural laminar flow section. Cirrus VK-30 used the Jeff Viken NLF414F airfoil. I don’t know if the SR20/SR22 uses the same airfoil or a different NLF section.

Anyway in this NASA tech paper it is explained how the stall resistance can be made better with the wing droop. The wing droop on the NASA test C210 actually indeed resembles the discontinuity on the Cirrus SR20/SR22 wing. Please have a look:
Wind tunnel results of the low-speed NLF(1)-0414F airfoil

Notable thing is that the Vmax-probe did not have this wing droop or any other means to prevent tip stall. And it crashed on landing possibly according to NTSB report and Bruce Carmichael’s book, because of unfavorable stalling charasteristics at low Re of the airfoil caused a hard landing (which the pilot did not survive). NLF414F is not to be used without some means to prevent tip stall and to soften the otherwise very sharp stall at low Re.

  1. No trackbacks yet.

You must be logged in to post a comment.
%d bloggers like this: